Skip to main content
A painter rolling a finish coat onto an interior wall beside a freshly cased doorway
5.0 on Google · 4 reviews

Window Replacement Across MD, DC and Northern VA

Every opening measured on its own, and anything rotten behind the trim shown to you and priced before the new window goes in.

Window work we do

Each opening is measured on its own. Rot or a failed sill found behind the trim is shown to you and priced before it is closed up.

  • Window Replacement
  • Full-Frame Replacement
  • Rotten Sill Repair
  • Trim and Finish

Window Replacement

Insert replacement into a sound existing frame, which keeps the exterior trim intact.

Full-Frame Replacement

Where the frame or sill has gone, the whole assembly comes out and the opening is rebuilt.

Rotten Sill Repair

What is found behind the trim on older stock. Priced when it is found, not after it is covered.

Trim and Finish

Interior casing and exterior trim made good, so the new window does not announce itself.

Window problems homeowners call about

  • Insert or full-frame?

    Insert where the existing frame and sill are sound, which is cheaper and keeps the exterior trim. Full-frame where they are not. You are told which after the openings are measured, not before.

  • Condensation between the panes.

    The seal has failed. That is a glass unit or a window replacement, and no amount of resealing around the outside will change it.

  • Do I have to replace all of them at once?

    No. Doing the worst elevation first is common, and the rest can follow. The measurements are taken per opening either way.

Window replacement worries

That the new windows will not fit properly.

Every opening is measured individually rather than counted and multiplied, because every window in an older house is a slightly different size.

That rot behind the trim gets closed back up.

Once the trim is off, anything found behind it is shown to you and priced before it is closed up.

That you have to replace every window at once.

No. Doing the worst side of the house first is common, and the rest can follow. You are told whether each opening needs an insert or a full frame after it is measured.

That the new windows look stuck on.

Interior casing and exterior trim are made good, so the new window does not announce itself.

When Windows Show Their Problems Around DC

Drafts make themselves known with the first cold nights, around the average first freeze in mid November, and nor'easter season runs from September to April, pushing rain at failed sills and seals. Fall is a good time to measure and order. See why windows draft.

Window measures booked seven days a week

Get your window replacement priced

  • Each opening measured free of charge
  • Insert or full frame, explained window by window
  • Sill repair behind the trim priced before it is closed up

Drafty windows? Talk to us:

(240) 695-4415

Window Estimate Request

We take insurance jobs. Financing may also be available for qualifying projects. Ask when you call.

How window replacement runs

  1. 1Every opening is measured on its own, never counted and multiplied.
  2. 2You get the insert or full-frame reasoning in writing, per opening where they differ.
  3. 3Once the trim is off, anything found behind it is shown to you and priced before it is closed up.
  4. 4Units are set level, shimmed, insulated and sealed.
  5. 5Interior casing and exterior trim are made good so the new window does not announce itself.

Every window measured on its own

We measure every opening individually, because the windows in an older house are rarely the same size twice. Whether each one gets an insert or a full-frame replacement is written down opening by opening.

  • When the trim comes off, anything found behind it is shown to you and priced before it is closed up.
  • Each unit is set level, shimmed, insulated and sealed, and the casing is made good so the new window does not stand out.
  • In a DC historic district or the Alexandria BAR districts, approval comes before the order, and that time is in the schedule.

Window replacement questions

Insert or full-frame replacement?

⌄
Insert where the existing frame and sill are sound, full-frame where they are not. You are told which after the openings are measured.

There is fog between the panes. Can that be fixed?

⌄
The seal has failed, so it is a glass unit or a window replacement. Sealing around the outside will not change it.
Bonded & insured60 to 90 day warranty on our workSince 2020How every project runs →