Skip to main content
A painter rolling a finish coat onto an interior wall beside a freshly cased doorway
5.0 on Google · 4 reviews

Interior Carpentry Across MD, DC and Northern VA

Nothing in an older house is square, so trim, built-ins and doors get scribed to the walls you actually have.

Interior carpentry we do

Trim and millwork, built-ins and shelving, stair parts, and interior doors hung and adjusted. Where the house has moved, we scribe to the walls, not the drawing.

  • Trim and Millwork
  • Built-Ins and Shelving
  • Stairs and Railings
  • Interior Doors

Trim and Millwork

Baseboard, casing, crown and chair rail, mitred and coped to the walls you have.

Built-Ins and Shelving

Alcove units, window seats and shelving, scribed into corners that are rarely at ninety degrees.

Stairs and Railings

Treads, risers, newels, balusters and handrail, including replacing parts on an existing flight.

Interior Doors

Hung, shimmed and adjusted so they latch cleanly and stay that way through a humid summer.

Trim and door trouble we fix

  • My trim has gaps at every corner. Can that be fixed?

    Usually, yes. Corners open up because the joint was mitred rather than coped, or because the wall behind it is out of plumb. Both are fixable without replacing every length.

  • My door sticks in summer only.

    That is the door and the frame moving with humidity. In most cases it is an adjustment, not a replacement.

Carpentry worries in an older house

That straight trim on a wavy wall leaves a gap you can see from across the room.

Almost nothing in an older house is square. The work is scribed and fitted to the walls you have, not cut to a drawing.

That the corners open up again by next year.

Corners usually open because the joint was mitred, not coped, or because the wall behind is out of plumb. Both are fixable without replacing every length.

That sawdust ends up all over the house.

Joints are filled and caulked ready for paint, and the site is left clean. Floors are protected in the rooms we work in, as our standards set out.

Carpentry and the DC Humidity

Wood moves with the air, and DC summers run hot and humid. That is why interior doors are hung and adjusted to close in August as well as January. A door that sticks only in summer usually needs an adjustment, not a replacement. See why doors stick and windows draft.

Carpentry estimates on any day

Price the trim, built ins or stairs

  • We look at the walls and corners at no charge
  • Matching an old trim profile is checked before ordering
  • The written price covers fitting to walls that are not square

Describe the woodwork by phone:

(240) 695-4415

Carpentry Estimate Request

We take insurance jobs. Financing may also be available for qualifying projects. Ask when you call.

How carpentry work runs

  1. 1We look at what is there and at what the walls and floors are doing, because almost nothing is square.
  2. 2Profiles are matched from a cut sample where we are working into existing trim.
  3. 3You get the scope and the price in writing, including what happens where the house has moved.
  4. 4The work is scribed and fitted on site, never cut to a drawing alone.
  5. 5Joints are filled and caulked ready for paint, and the site is left clean.

Trim and carpentry questions

Can you match trim in an older house?

⌄
Often, from a cut sample. Where an exact match is not available the closest profile is agreed with you before anything is ordered.

Why do my mitred corners keep opening?

⌄
Because they were mitred instead of coped, or the wall behind is out of plumb. Both are fixable without replacing every length.
Bonded & insured60 to 90 day warranty on our workSince 2020How every project runs →