Skip to main content

Cost Guide

How much does drywall repair cost?

By All Purpose Anytime Services LLC

We do not publish a price for drywall repair. What it costs comes from four things: how big the damage is and how many spots there are, whether it is a wall or a ceiling, the finish level and texture the repair has to match, and what caused it. Each is below, along with what you can patch yourself.

How much does drywall repair cost?

It is set by the size and number of repairs, whether they are on a wall or a ceiling, the finish the repair has to match, and the cause. A dozen nail holes before painting is a short visit. A water-stained ceiling is a leak to find first, board to cut out, and a ceiling to blend in under the light from a window.

Most of a small repair's price is the number of visits. Joint compound goes on in coats, and each coat has to dry before the next is sanded and laid over it, so even a modest patch usually means coming back. That is why one small hole and five small holes in the same room cost close to the same.

How much does it cost to fix a hole in the wall?

It depends first on the size of the hole. Nail and screw holes are filled and sanded. A hole up to a few inches across, a doorknob hole for example, gets a patch over or behind it and several thin coats. A hole bigger than your hand is cut back to a clean square, a new piece of board is screwed to backing or to the studs, and the seams are taped and coated like new work.

After the size, the texture. A patch on a smooth wall is the easy case. A patch on an orange peel or knockdown wall has to have the texture matched, or it shows as a flat square once painted. Paint is its own line, and a patch usually needs the whole wall repainted, corner to corner, to disappear.

How much does it cost to replace or hang drywall?

New board is priced by the area, and the area is only part of it. The board type matters: moisture-resistant board near a shower or in a basement, and fire-rated board where the building code calls for it, such as a garage ceiling with a bedroom above it. Ceilings take more labor than walls. High walls and stairwells need staging.

Then comes the finish level, which sets most of the finishing labor. Level 4 suits most rooms. Level 5, a skim coat over the whole surface, is for walls that take raking light or gloss paint. Taking out the old board, hauling it away and fixing any insulation behind it are their own lines. Our drywall and wall repair page covers how that work runs.

Can I patch a hole in drywall myself?

Small ones, yes. For nail holes and dents, scrape off any loose paper, fill with lightweight spackle, let it dry and sand it flat. For a hole up to a few inches, a self-adhesive mesh patch over the hole, then two or three thin coats of joint compound, each spread a little wider than the last and sanded once dry. Prime the patch before painting, or the compound will show through the paint as a dull spot.

For a bigger hole, cut the damaged board back to a neat square, screw strips of wood inside the wall across the opening, screw a piece of board of the same thickness to them, then tape the seams and coat them. Mudding is mostly patience: thin coats, feathered wide, with drying and light sanding between them. Hanging whole sheets on a wall is two-person work, and a ceiling sheet needs a lift or a second pair of arms.

How long does drywall take to dry?

The board itself does not need drying. What you wait on is the joint compound. Ready-mixed compound from a bucket dries in the air, so each coat has to dry right through before the next one goes on, and the time printed on the label assumes a warm room with moderate humidity. In a cold or damp room it takes longer, and a thick coat takes longer than a thin one.

Setting-type compound, sold as a powder you mix, hardens by a chemical set, and the number in its product name, such as 20, 45 or 90, is roughly the minutes you have before it sets. It lets two coats go on in one day, but it is harder to sand. Follow the drying time on the product you buy, and do not paint until the last coat is dry and primed.

When should I hire someone for drywall repair?

  • The damage came from water. The leak has to be found and fixed first, by a plumber or a roofer where it is their work, or the new patch stains the same way.
  • It is a ceiling, or a wall that takes light from a window at a low angle. Every ridge and edge shows there.
  • The wall or ceiling has a texture you need matched.
  • A crack keeps coming back in the same place. That is movement in the framing, and it needs the cause fixed and the joint taped, not filled again.
  • The area is large, or the room is about to be painted and you want it to look new.
  • It is a textured ceiling in an older house you want taken back to smooth. Have it tested for asbestos before anyone scrapes it.

How we price drywall repair

We look at the damage, find out what caused it, and fix the cause before the finish goes on. The finish level is written into the scope, because the price and the look both come from it, and the coats get their drying time between visits. Paint after the repair can go on the same quote. The written estimate follows the visit within 24 to 48 hours, with a link to approve it.

Want those walls priced?

We look at the damage for free, name the finish level in writing and send the price within 24 to 48 hours of the visit.

Free Estimate · No Account Needed

Request an Online Estimate

We reply during business hours, 7:00 AM to 7:00 PM every day.

We take insurance jobs. Financing may also be available for qualifying projects. Ask when you call.